doc. Ing. David Pánek, Ph.D.
Faculty/Institut Fakulta elektrotechnická
Katedra elektrotechniky a počítačového modelování
E-mail:
Office number:
EK 613
(Univerzitní 26, Plzeň
)
Phone
37763 4657
volat
ResearcherID
ORCID
Department/Division: Katedra elektrotechniky a počítačového modelování
| Faculty/Institute | Fakulta elektrotechnická (FEL) |
|---|---|
| Job classification | docent |
Information about doctoral study
| Michael MÜLLER, M.Sc. | |
|---|---|
| Faculty/Institute | Fakulta elektrotechnická (FEL) |
| Department/Division: | Katedra elektrotechniky a počítačového modelování |
| Study programme | Electrical engineering and informatics |
| Doctoral thesis | Model order reduction for nonlinear systems |
| Ing. Jan KASKA | |
|---|---|
| Faculty/Institute | Fakulta elektrotechnická (FEL) |
| Department/Division: | Katedra elektrotechniky a počítačového modelování |
| Study programme | Elektrotechnika a informatika |
| Doctoral thesis | Modelování a optimalizace tištěných elektromechanických struktur |
| Ing. Zdeněk VRŠECKÝ | |
|---|---|
| Faculty/Institute | Fakulta elektrotechnická (FEL) |
| Department/Division: | Katedra elektrotechniky a počítačového modelování |
| Study programme | Elektrotechnika a informatika |
| Doctoral thesis | Prediktivní řízení s využitím neuronových sítí na zařízeních s omezenými zdroji |
| Sahar AHMADI | |
|---|---|
| Faculty/Institute | Fakulta elektrotechnická (FEL) |
| Department/Division: | Katedra elektrotechniky a počítačového modelování |
| Study programme | Electrical engineering and informatics |
| Doctoral thesis | Modelling and optimization of printed electromechanical structures |
Anténní řady s kvantizovaným řízením
| Duration: | 01.01.2020 - 31.12.2022 |
| Provider: | Grantová agentura České republiky |
| Project detail |
SMV 19 - Úprava aplikace pro výpočet šíření tepla a vlhkostí ve zdivu
| Duration: | 31.07.2019 - 30.09.2019 |
| Provider: | Ministerstvo školství, mládeže a tělovýchovy |
| Project detail |
SMV 17 Vývoj aplikace pro výpočet šíření tepla a vlhkosti ve zdivu
| Duration: | 13.02.2017 - 31.12.2017 |
| Provider: | Ministerstvo školství, mládeže a tělovýchovy |
| Project detail |
SMV 17 Vývoj a optimalizace cívky pro indukční pájení
| Duration: | 07.12.2016 - 29.05.2017 |
| Provider: | Ministerstvo školství, mládeže a tělovýchovy |
| Project detail |
Hybridní laserové technologie
| Duration: | 01.01.2013 - 31.12.2016 |
| Provider: | Technologická agentura České Republiky |
| Project detail |
Nové adaptivní monolitické metody vyšších řádů pro numerické řešení evolučních multifyzikálních problémů v elektrotechnice
| Duration: | 01.01.2011 - 31.12.2015 |
| Provider: | Grantová agentura České republiky |
| Project detail |
Rozšíření výuky informatiky o programování hardwarových modulů
| Duration: | 01.01.2010 - 31.12.2010 |
| Provider: | Ministerstvo školství, mládeže a tělovýchovy |
| Project detail |
Vybudování experimentální laboratoře pro podporu výuky teoretické elektrotechniky
| Duration: | 01.01.2007 - 31.12.2007 |
| Provider: | Ministerstvo školství, mládeže a tělovýchovy |
| Project detail |
Přehled publikací zapsaných v IS ZČU (107)
2021
|
KARBAN, P. PÁNEK, D. OROSZ, T. PETRÁŠOVÁ, I. DOLEŽEL, I. FEM based robust design optimization with Agros and Artap. COMPUTERS & MATHEMATICS WITH APPLICATIONS, 2021, roč. 81, č. January 2021, SI, s. 618-633. ISSN: 0898-1221
Detail
|
2020
|
PÁNEK, D. ., KARBAN, P. ., OROSZ, T. ., DOLEŽEL, I. . Comparison of simplified techniques for solving selected coupled electroheat problems. COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2020, roč. 39, č. 1, s. 220-230. ISSN: 0332-1649
Detail
|
|
OROSZ, T. ., PÁNEK, D. ., KARBAN, P. . FEM based preliminary design optimization in case of large power transformers. Applied Sciences, 2020, roč. 10, č. 4, s. 1-18. ISSN: 2076-3417
Detail
|
|
PÁNEK, D. Methods of Robust Design in Electrical Engineering. 1. vyd. Plzeň : Západočeská univerzita v Plzni, 2020, 97 s.
Detail
|
|
OROSZ, T. ., RASSOLKIN, A. ., KALLASTE, A. ., ARSENIO, P. ., PÁNEK, D. ., KASKA, J. ., KARBAN, P. . Robust design optimization and emerging technologies for electrical machines: challenges and open problems. Applied Sciences, 2020, roč. 10, č. 19, s. 1-33. ISSN: 2076-3417
Detail
|
|
PÁNEK, D. KARBAN, P. OROSZ, T. ?rtap. 2020.
Detail
|
2019
|
PÁNEK, D., KARBAN, P., DOLEŽEL, I. Calibration of numerical model of magnetic induction brazing. IEEE Transactions on Magnetics, 2019, roč. 55, č. 6, s. 1-4. ISSN: 0018-9464
Detail
|
|
PÁNEK, D.., KARBAN, P.., DOLEŽEL, I.. Comparison of simplified techniques for solving selected coupled electroheat problems. In HES-19 : International Conference on Heating by Electromagnetic Sources : (proceedings). Padua: University of Padua, 2019. s. 125-130. ISBN: 978-88-89884-35-5 , ISSN: 2385-2933
Detail
|
|
OROSZ, T.., KARBAN, P.., PÁNEK, D.., DOLEŽEL, I.. FEM-Based transformer design optimization technique with evolutionary algorithms and geometric programming. In 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2019) : /e-Proceedings/. 2019. s. 1-5. ISBN: neuvedeno , ISSN: neuvedeno
Detail
|
|
PETRÁŠOVÁ, I.., KARBAN, P.., PÁNEK, D.. Model of self-sensing microactuator with embedded sensor and its control. In 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2019) : /e-Proceedings/. 2019. s. 1-4. ISBN: neuvedeno , ISSN: neuvedeno
Detail
|
|
KARBAN, P.., PÁNEK, D.., OROSZ, T.., DOLEŽEL, I.. Multi-objective T.E.A.M. benchmark problem with gaussian regressor. In 22nd International Conference on the Computation of Electromagnetic Fields (Compumag 2019) : /proceedings/. 2019. s. 1-2., ISSN: neuvedeno
Detail
|
|
KASKA, J.., OROSZ, T.., KARBAN, P.., DOLEŽEL, I.., PECHÁNEK, R.., PÁNEK, D.. Optimization of reluctance motor with printed rotor. In 22nd International Conference on the Computation of Electromagnetic Fields (Compumag 2019) : /proceedings/. Piscaway: IEEE, 2019. s. 1-4. ISBN: 978-1-72815-592-0
Detail
|
|
OROSZ, T., POÓR, P., KARBAN, P., PÁNEK, D. Power transformer design optimization for carbon footprint. In 2019 Electric Power Quality and Supply Reliability Conference (PQ) & 2019 Symposium on Electrical Engineering and Mechatronics (SEEM) : /proceedings/. Piscataway: IEEE, 2019. s. 1-4. ISBN: 978-1-72812-650-0
Detail
|
|
PÁNEK, D.., OROSZ, T.., KROPÍK, P.., KARBAN, P.., DOLEŽEL, I.. Reduced order model to control induction brazing process of aluminium pipes. In 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2019) : /e-Proceedings/. 2019. s. 1-4. ISBN: neuvedeno , ISSN: neuvedeno
Detail
|
|
PÁNEK, D., OROSZ, T., KROPÍK, P., KARBAN, P., DOLEŽEL, I. Reduced-order model based temperature control of induction brazing process. In 2019 Electric Power Quality and Supply Reliability Conference (PQ) & 2019 Symposium on Electrical Engineering and Mechatronics (SEEM) : /proceedings/. Piscataway: IEEE, 2019. s. 1-4. ISBN: 978-1-72812-650-0
Detail
|
|
STAŠEK, J. ., POLÁČEK, D. ., HOŠEK, J. ., KARBAN, P. ., PÁNEK, D. ., KROPÍK, P. . TEPELNÁ TECHNIKA 2D. 2019.
Detail
|
|
PÁNEK, D.., KARBAN, P.. Úprava aplikace pro výpočet šíření tepla a vlhkosti ve zdivu. DEKPROJEKT s.r.o., 2019.
Detail
|
2018
|
PÁNEK, D., KARBAN, P., DOLEŽEL, I., PETRÁŠ, V. Calculation of radiation field iso-surfaces using numerical continuation method. In 12th International Conference Elektro 2018 : conference proceedings. Piscataway: IEEE, 2018. s. 1-4. ISBN: 978-1-5386-4759-2
Detail
|
|
KOTLAN, V., HAMAR, R., PÁNEK, D., SLOBODN?K, Development of massive induction brazing coils for Lucie evaporators of type MQB A0 and GEM. Valeo Výměníky Tepla, s.r.o., 2018.
Detail
|
|
KARBAN, P., PÁNEK, D., DOLEŽEL, I. Model of induction brazing of nonmagnetic metals using model order reduction approach. COMPEL : the International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2018, roč. 37, č. 4, s. 1515-1524. ISSN: 0332-1649
Detail
|
|
PÁNEK, D., KOTLAN, V., HAMAR, R., DOLEŽEL, I. Novel algorithm for modeling combined laser and induction welding respecting keyhole effect. Applied Mathematics and Computation, 2018, roč. 319, č. 15 February, s. 254-263. ISSN: 0096-3003
Detail
|
|
DOLEŽEL, I., KOTLAN, V., HAMAR, R., PÁNEK, D. Numerical solution of electroheat problems with time-varying geometries. Przeglad Elektrotechniczny, 2018, roč. 94, č. 1, s. 25-28. ISSN: 0033-2097
Detail
|
|
PETRÁŠOVÁ, I., KARBAN, P., PÁNEK, D., ŠROUBOVÁ, L. Shape and topology optimization of high power converter busbar. In Proceedings of 2018 19th International Conference Computational Problems of Electrical Engineering (CPEE 2018). Piscataway: IEEE, 2018. s. 1-4. ISBN: 978-1-5386-7895-4
Detail
|
|
KOTLAN, V., PÁNEK, D., HAMAR, R., DOLEŽEL, I. Shape optimization of deposited layer produced by combined cladding process. IEEE Transactions on Magnetics, 2018, roč. 54, č. 3, s. 1-4. ISSN: 0018-9464
Detail
|
|
PÁNEK, D., HAMAR, R., DOLEŽEL, I. Shape optimization of devices taking Into account production tolerances. IEEE Transactions on Magnetics, 2018, roč. 54, č. 3, s. 1-4. ISSN: 0018-9464
Detail
|
|
PETRÁŠ, V., PÁNEK, D., KARBAN, P., DOLEŽEL, I., VEJVARA, L., BRADÁČOVÁ, I. Utilization of numerical continuation method for calculating the critical intensity of the radiant heat component. Acta Technica ČSAV, 2018, roč. 63, č. 1, s. 57-64. ISSN: 0001-7043
Detail
|
2017
|
KARBAN, P., PÁNEK, D., MACH, F., DOLEŽEL, I. Calibration of numerical models based on advanced optimization and penalization techniques. Journal of Electrical Engineering = Elektrotechnický časopis, 2017, roč. 68, č. 5, s. 396-400. ISSN: 1335-3632
Detail
|
|
KOTLAN, V., HAMAR, R., PÁNEK, D., DOLEŽEL, I. Cladding realized by combined laser and induction heating. In XIX. International symposium on theoretical electrical engineering (ISTET 2017) : Book of Abstracts. Ilmenau: Technische Universität Ilmenau, 2017. s. 65. ISBN: neuvedeno
Detail
|
|
HAMAR, R., PÁNEK, D., SLOBODNÍK, K. Development of induction brazing coil for Lucie evaporators using generator CEIA 25-SA/80. Valeo výměníky tepla, s.r.o., 2017.
Detail
|
|
KOTLAN, V., HAMAR, R., PÁNEK, D., ŠROUBOVÁ, L. Development of induction brazing coils for CO2 evaporator and monoblock using generator CEIA 25-SA/80. Valeo výměníky tepla, s.r.o., 2017.
Detail
|
|
PÁNEK, D., KOTLAN, V., HAMAR, R., DOLEŽEL, I. Inverse technique for determining temperature dependence of material properties. COMPEL : the International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2017, roč. 36, č. 2, s. 427-435. ISSN: 0332-1649
Detail
|
|
KOTLAN, V., HAMAR, R., PÁNEK, D., DOLEŽEL, I. Model of depositing layer on cylindrical surface produced by induction-assisted laser cladding process. Open Physics, 2017, roč. 15, č. 1, s. 971-978. ISSN: 2391-5471
Detail
|
|
KARBAN, P., PÁNEK, D., DOLEŽEL, I. Model of induction brazing of nonmagnetic metals using model order reduction approach. In XIX. International symposium on theoretical electrical engineering (ISTET 2017) : Book of Abstracts. Ilmenau: Technische Universität Ilmenau, 2017. s. 21. ISBN: neuvedeno
Detail
|
|
DOLEŽEL, I., KOTLAN, V., HAMAR, R., PÁNEK, D. Numerical modeling of hybrid laser welding taking into account phase change of material. COMPEL : the International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2017, roč. 36, č. 2, s. 417-426. ISSN: 0332-1649
Detail
|
|
PÁNEK, D., HAMAR, R. Optimization of induction brazing coil. Valeo výměníky tepla, s.r.o., 2017.
Detail
|
|
KOTLAN, V., PÁNEK, D., HAMAR, R., DOLEŽEL, I. Shape optimization of deposited layer produced by combined cladding process. In 21st International Conference on the Computation of Electromagnetic Fields (Compumag 2017) : /proceedings/. Montreal: International Compumag Society, 2017. s. 1-2. ISBN: neuvedeno
Detail
|
|
PÁNEK, D., HAMAR, R., DOLEŽEL, I. Shape optimization of devices taking into account production tolerances. In 21st International Conference on the Computation of Electromagnetic Fields (Compumag 2017) : /proceedings/. Montreal: International Compumag Society, 2017. s. 1-2. ISBN: neuvedeno
Detail
|
|
PÁNEK, D., KARBAN, P. Stacionární rozložení tepla a vlhkosti ve stavebních konstrukcích. 2017.
Detail
|
|
PÁNEK, D., KOTLAN, V. Vývoj a optimalizace induktorů pro pájení trubek do výparníků. Valeo Výměníky Tepla s.r.o., Skandinávská 992, 267 53 Žebrák, Česká republika, 2017.
Detail
|
|
PÁNEK, D., KROPÍK, P. Vývoj jádra pro výpočet šíření tepla a vlhkosti. DEKPROJEKT s.r.o, Tiskařská 10/257, budova TTC TECHKOM CENTRUM, 108 00 PRAHA 10 - Malešice, 2017.
Detail
|
2016
|
Šolín, P., Karban, P., Doležel, I., Pánek, D. 5th European Seminar on Computing. Plzeň, 05.06.2016 - 10.06.2016.
Detail
|
|
PÁNEK, D., KARBAN, P., MACH, F., DOLEŽEL, I., KROPÍK, P. Calibration of numerical models based on advanced optimization with penalization techniques. In ESCO 2016 : 5th European Seminar on Computing : Book of Abstracts. Pilsen: University of West Bohemia in Pilsen, 2016. s. 145., ISSN: neuvedeno
Detail
|
|
KOTLAN, V., PÁNEK, D., HAMAR, R., DOLEŽEL, I. Combination of induction and laser cladding and its 3D computer model. In Proceedings of 2016 17th International Conference Computational Problems of Electrical Engineering (CPEE 2016). Piscataway: IEEE, 2016. s. 1-4. ISBN: 978-1-5090-2800-9
Detail
|
|
KOTLAN, V., HAMAR, R., PÁNEK, D., DOLEŽEL, I. Combined heat treatment of metal materials. COMPEL : the International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2016, roč. 35, č. 4, s. 1450-1459. ISSN: 0332-1649
Detail
|
|
PÁNEK, D., KOTLAN, V., HAMAR, R., DOLEŽEL, I. Inverse technique for determining temperature dependence of material properties. In HES-16 : International Conference on Heating by Electromagnetic Sources : (proceedings). Padua: University of Padua, 2016. s. 165-170. ISBN: 978-88-89884-32-4 , ISSN: 2385-2933
Detail
|
|
KOTLAN, V., DOLEŽEL, I., HAMAR, R., PÁNEK, D. Modeling of selected 3D electroheat coupled problems with time-varying geometries. In IEEE CEFC 2016 : the 17th Biennial Conference on Electromagnetic Field Computation : (proceedings). Piscataway: IEEE, 2016. s. 1-1. ISBN: 978-1-5090-1032-5
Detail
|
|
DOLEŽEL, I., KOTLAN, V., HAMAR, R., PÁNEK, D. Numerical modeling of hybrid laser welding taking into account phase change of material. In HES-16 : International Conference on Heating by Electromagnetic Sources : (proceedings). Padua: University of Padua, 2016. s. 91-96. ISBN: 978-88-89884-32-4 , ISSN: 2385-2933
Detail
|
|
KARBAN, P., PÁNEK, D., KROPÍK, P. Performance of the AMG solvers in solving linear systems based on Hp-FEM. In ESCO 2016 : 5th European Seminar on Computing : Book of Abstracts. Pilsen: University of West Bohemia in Pilsen, 2016. s. 144., ISSN: neuvedeno
Detail
|
|
PÁNEK, D., KARBAN, P., MACH, F., DOLEŽEL, I. Utilization of advanced optimization and penalization techniques for calibration of numerical models. In IEEE CEFC 2016 : the 17th Biennial Conference on Electromagnetic Field Computation : (proceedings). Piscataway: IEEE, 2016. s. 1-1. ISBN: 978-1-5090-1032-5
Detail
|
|
KARBAN, P., PÁNEK, D., KROPÍK, P. Utilization of algebraic multigrid for solving electromagnetic field by HP-FEM. In 11th International Conference Elektro 2016 : proceedings. Piscataway: IEEE, 2016. s. 527-532. ISBN: 978-1-4673-8698-2
Detail
|
2015
|
KOUDELA, L., KOTLAN, V., PÁNEK, D. Design of thermoelastic friction clutch using numerical analysis. In Proceedings of the 19th International Symposium on High Voltage Engineering (ISH 2015). Plzeň: Západočeská univerzita, 2015. s. 1-4. ISBN: 978-80-261-0476-6
Detail
|
|
PÁNEK, D., HAMAR, R. Development of induction brazing coil - CO2. Valeo Výměníky Tepla s.r.o., 2015.
Detail
|
|
VODŇANSKÝ, J., PÁNEK, D., HAMAR, R., SLOBODNÍK, K. Development of induction brazing coil - Lucie End. Valeo Výměníky Tepla s.r.o., 2015.
Detail
|
|
VODŇANSKÝ, J., PÁNEK, D., HAMAR, R., SLOBODNÍK, K. Development of induction brazing coil - Monoblock. Valeo výměníky tepla s.r.o., Skandinávská 992, 267 53 Žebrák, 2015.
Detail
|
|
KOTLAN, V., PÁNEK, D., HAMAR, R., DOLEŽEL, I. Model of laser heating with induction pre- and post-heating and its experimental verification. In Proceedings of IECON 2015 : 41st Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE, 2015. s. 2852-2857. ISBN: 978-1-4799-1762-4
Detail
|
|
KOTLAN, V., PÁNEK, D., HAMAR, R., DOLEŽEL, I., NĚMEČEK, S. Numerical model of laser welding with induction pre- and/or postheating and its experimental verification. In Proceedings of the XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2015). Valencia: Instituto Ingeniería Energética, Universitat Polit?cnica de Val?ncia, 2015. s. 1-6. ISBN: 978-84-606-9102-0
Detail
|
|
KOTLAN, V., HAMAR, R., PÁNEK, D., DOLEŽEL, I. Numerical simulation of hybrid laser welding with induction pre- and post-heating. In Využití laserů v průmyslu. Plzeň: MATEX PM s.r.o., 2015. s. 86-93.
Detail
|
|
PÁNEK, D., KOTLAN, V., HAMAR, R., DOLEŽEL, I. Optimization of inductor for pre- and post-heating metal parts during their edge laser welding. In Proceedings of IECON 2015 : 41st Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE, 2015. s. 2415-2420. ISBN: 978-1-4799-1762-4
Detail
|
|
ŠROUBOVÁ, L. Posouzení vlivu transformovny TR Kostelec na sdělovací kabel O2. Profi EMG s.r.o., 2015.
Detail
|
|
PÁNEK, D. Vývoj a optimalizace induktorů pro pájení trubek do výparníků klimatizačních jednotek. Valeo výměníky tepla s.r.o., Skandinávská 992, 267 53 Žebrák, 2015.
Detail
|
2014
|
PÁNEK, D., KŮS, P., HAMAR, R., KOTLAN, V., DOLEŽEL, I. 2D Shape Optimization of Induction Pre-Heater. In The Sixteenth Biennial IEEE Conference on Electromagnetic Field Computation. Annecy, Francie: Grenoble Electrical Engineering Lab University of Grenoble, 2014. s. '4(c)'.
Detail
|
|
HAMAR, R., KOTLAN, V., PÁNEK, D., DOLEŽEL, I. 3D model of laser hardening of steel bodies with induction pre-heating. In IET Conference Publications. London: The Institution of Engineering and Technology, 2014. s. 1-2. ISBN: 978-1-84919-817-2 , ISSN: 0537-9989
Detail
|
|
DOLEŽEL, I., KOTLAN, V., HAMAR, R., PÁNEK, D. Continuous Laser Hardening with Induction Pre-heating. Indukcionnyj nagrev, 2014, roč. 1, č. 27, s. 10-15. ISSN: 2076-3840
Detail
|
|
PÁNEK, D., SLOBODNÍK, K. Design and optimization of air coil magnetic shields. Škoda Electric, a.s., 2014.
Detail
|
|
KOTLAN, V., PÁNEK, D., HAMAR, R., DOLEŽEL, I. Modelling of laser heating with induction pre-heating and post-heating and its experimental verification. In Proceedings of IECON 2014 : 40th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE, 2014. s. 3246-3251. ISBN: 978-1-4799-4032-5 , ISSN: 1553-572X
Detail
|
|
KOTLAN, V., HAMAR, R., PÁNEK, D., DOLEŽEL, I., NĚMEČEK, S., FIEDLER, L. Numerical Model of Combined Induction and Laser Heating and its Experimental Verification. In The Sixteenth Biennial IEEE Conference on Electromagnetic Field Computation. Annecy, Francie: Grenoble Electrical Engineering Lab University of Grenoble, 2014. s. '4(c)'.
Detail
|
|
PÁNEK, D., KŮS, P., KOTLAN, V., HAMAR, R., DOLEŽEL, I. Optimization of Pre-Heating System for Edge Welding. In XXIII Symposium Electromagnetic Phenomena in Nonlinear Circuits. Plzeň: University of West Bohemia, 2014. s. 85-86. ISBN: 978-80-261-0350-9
Detail
|
|
PÁNEK, D., KŮS, P., KOTLAN, V., HAMAR, R., DOLEŽEL, I. Shape Optimization of Pre-Heating Inductor for Edge Welding by Laser. In The 15th International Conference on Computational Problems of Electrical Engineering. Žilina: University of Žilina, 2014. s. 10-10. ISBN: 978-80-554-0910-8
Detail
|
|
PÁNEK, D., DOLEŽEL, I., KOTLAN, V. Shape optimization of cylindrical inductor for induction pre-heating. In Zastosowania Elektromagnetyzmu w Nowoczesnych Technikach i Medycynie. Varšava: Polskie Towarzystwo Zastosowan Elektromagnetyzmu, 2014. s. 157. ISBN: 83-88131-99-0
Detail
|
|
PEROUTKA, Z., PÁNEK, D. Shielding optimization. Škoda Electric a.s., Tylova 1/57, 301 28 Plzeň, 2014.
Detail
|
|
KARBAN, P., PÁNEK, D., KOUDELA, L., JANSA, J. Vývoj software pro modelování akustických parametrů difuzorů. Západočeská univerzita v Plzni, 2014.
Detail
|
2013
|
KARBAN, P., KŮS, P., PÁNEK, D. Agros2D - generator. 2013.
Detail
|
|
DOLEŽEL, I., KOTLAN, V., PÁNEK, D. Mathematical Model of Laser Hardening. In Zastosowania Elektromagnetyzmu w Nowoczesnych Technikach i Medycynie. Varšava: Polskie Towarzystwo Zastosowan Elektromagnetyzmu, 2013. s. 78-80. ISBN: 83-88131-99-0
Detail
|
|
DOLEŽEL, I., PÁNEK, D., KOTLAN, V., HAMAR, R. Modeling and Control of Laser Hardening. In CPEE - AMTEE 2013. Pilsen: University of West Bohemia, 2013. s. IV-5. ISBN: 978-80-261-0247-2
Detail
|
|
KOTLAN, V., PÁNEK, D., HAMAR, R., DOLEŽEL, I. Numerical Model of Continuous Laser Hardening of Steel Bodies and its Control. In XVI International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering. Ohrid, Makedonie: Faculty of Electrical Engineering and Information Technologies, Skopje, Republic of Macedonia, 2013. s. "PS4.029_1/6"-"PS4.029_6/6". ISBN: 978-9989-630-66-8
Detail
|
|
KARBAN, P., MACH, F., KŮS, P., PÁNEK, D., DOLEŽEL, I. Numerical solution of coupled problems using code Agros2D. COMPUTING, 2013, roč. 95, č. 1, s. 381-408. ISSN: 0010-485X
Detail
|
|
KUBÍK, Z., SKÁLA, J., PÁNEK, D., KARBAN, P. Numerical solution of shielding effectiveness. Przeglad Elektrotechniczny, 2013, roč. 89, č. 6, s. 266-268. ISSN: 0033-2097
Detail
|
|
KUBÍK, Z., KARBAN, P., PÁNEK, D., SKÁLA, J. On the shielding effectiveness calculation. COMPUTING, 2013, roč. 95, č. 1, s. 111-121. ISSN: 0010-485X
Detail
|
|
DOLEŽEL, I., KARBAN, P., KROPÍK, P., KOTLAN, V., PÁNEK, D. Optimized control of field current in thermoelastic actuator for accurate setting of position. APPLIED MATHEMATICS AND COMPUTATION, 2013, roč. 219, č. 13, s. 7187-7193. ISSN: 0096-3003
Detail
|
2012
|
KARBAN, P., PÁNEK, D., HRUŠKA, K. Design and Optimization of Air Coil Magnetic Shields. Plzeň : Západočeská univerzita, 2012. 28 s.
Detail
|
|
MACH, F., KARBAN, P., KŮS, P., PÁNEK, D. FSPM motor. 2012.
Detail
|
|
PÁNEK, D. On Strongly Non-Linear Systems Discretization. In IFAC Proceedings Volumes (IFAC-PapersOnline). New York, USA: International Federation of Automatic Control, 2012. s. 197-202. ISBN: 978-3-902823-02-1 , ISSN: 1474-6670
Detail
|
|
MACH, F., PÁNEK, D., DOLEŽEL, I., KARBAN, P., KŮS, P. Optimization of PPMT Machine Using Higher-Order Finite Element Method. In The 15th International Conference on Electrical Machines and Systems : proceedings. Piscataway: IEEE, 2012. s. 1-4. ISBN: 978-4-88686-077-4
Detail
|
|
KARBAN, P., KŮS, P., KOUDELA, L., PÁNEK, D. RF module for universal program Agros2D. 2012.
Detail
|
|
DOLEŽEL, I., PÁNEK, D., ULRYCH, B. Static and Dynamic Characteristics of Pulsed Actuator with Plunger Consisting of Iron Core and Permanent Magnet. In ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems. Piscataway: IEEE, 2012. s. 1-6. ISBN: 978-4-88686-077-4
Detail
|
|
KUBÍK, Z., KARBAN, P., PÁNEK, D., SKÁLA, J. Using hp-adaptive Methods in Shielding Effectiveness Calculations. Plzeň, 2012.
Detail
|
2011
|
POLCAR, P., MAYER, D., PÁNEK, D. A Novel Approach to Magnetic Fluids Permeability Measurement. In AMTEE 11 Advanced Methods in the Theory of Electrical Engineering. Plzeň: 2011. s. "VI-1"-"VI-2". ISBN: 978-80-7043-993-7
Detail
|
|
DOLEŽEL, I., PÁNEK, D., ULRYCH, B. Actuator with permanent magnet controlled by very short current pulses. In IET Conference Publications. Wroclav: IET Digital Library, 2011. s. 1-2. ISBN: 978-1-84919-468-6
Detail
|
|
PÁNEK, D., KROPÍK, P., PŘEDOTA, A. On fractal dimension estimation. Przeglad Elektrotechniczny, 2011, roč. 87, č. 5, s. 120-122. ISSN: 0033-2097
Detail
|
|
DOLEŽEL, I., PÁNEK, D., ULRYCH, B. Pulsed actuator with permanent magnet and its dynamic characteristics. In 2011 International Conference on Electrical Machines and Systems, ICEMS 2011. Piscataway: IEEE, 2011. s. 1-4. ISBN: 978-1-4577-1044-5
Detail
|
2010
|
DOLEŽEL, I., KARBAN, P., KROPÍK, P., PÁNEK, D. Accurate Control of Position by Induction Heating-Produced Thermoelasticity. IEEE Transaction on Magnetics, 2010, roč. 46, č. 8, s. 2888-2891. ISSN: 0018-9464
Detail
|
|
PÁNEK, D., LAHODA, J., HRUŠÁK, J., ŠTORK, M. Energometric Approach to Testing Chaoticity of Systems. Przeglad Elektrotechniczny, 2010, roč. 86, č. 1, s. 166-168. ISSN: 0033-2097
Detail
|
|
PÁNEK, D., KROPÍK, P., PŘEDOTA, A. On Fractal Dimension Estimation. In CPEE 2010. Plzeň: Západočeská univerzita, 2010. s. 59. ISBN: 978-80-7043-899-2
Detail
|
|
PÁNEK, D., HRUŠÁK, J., KROPÍK, P., POLCAR, P. On discretization of strongly non-linear systems. Acta Technica, 2010, roč. 55, č. 3, s. 301-314. ISSN: 0001-7043
Detail
|
|
PÁNEK, D., KROPÍK, P., PŘEDOTA, A. Radar with Chaotic Wave - Principle and Simulation. Graz, 2010.
Detail
|
2009
|
KARBAN, P., DONÁTOVÁ, M., PÁNEK, D. 3D Model of Magnetohydrodynamic Pump with Permanent Magnets. In Electric Power Engineering 2009. Ostrava: VSB - Technical University, 2009. s. 177-180. ISBN: 978-80-248-1947-1
Detail
|
|
PÁNEK, D., LAHODA, J., HRUŠÁK, J., ŠTORK, M. On chaotic systems synthesis and synchronization. Acta Technica ČSAV, 2009, roč. 54, č. 2, s. 179-198. ISSN: 0001-7043
Detail
|
2008
|
PÁNEK, D., MAYER, D., HRUŠÁK, J., ŠTORK, M. Structural Approach to Analysis of Dissipativity Conservativity, Chaoticity and Asymptotic Stability. In New aspect of systems. Athens: WSEAS, 2008. s. 114-119. ISBN: 978-960-6766-83-1
Detail
|
2007
|
PÁNEK, D., HRUŠÁK, J., DOLEŽEL, I. Energetic Approach to Investigation of Chaotic Behavior of Low-Dimensional Dynamic Systems and its Illustration on a Two-Disc Rikitake Dynamo. Visnik Nacional'nogo Universitetu "L'vivs'ka Politechnika", 2007, roč. 2007, č. 596, s. 39-45. ISSN: 0321-0499
Detail
|
|
BENEŠOVÁ, Z., KARBAN, P., PÁNEK, D. Experimantal Support of Theoretical Electrical Engineering Education. In AMTEE'07. Section IX, Education. V Plzni: Západočeská univerzita, 2007. s. 3-4. ISBN: 978-80-7043-564-9
Detail
|
2006
|
HRUŠÁK, J., ČERNÝ, V., PÁNEK, D. A new approach to system structure reconstruction based on a generalized Tellegen principle. In Proceedings of the 16th IFAC World Congress. Oxford : Elsevier, 2006, s. 1293-1298. ISBN: 0-08-045108-X
Detail
|
2005
|
HRUŠÁK, J., ČERNÝ, V., PÁNEK, D. A new approach to system structure reconstruction based on a generalized Tellegen principle. In Preprints of the 16th IFAC world congress. Prague: IFAC, 2005. s. 1-6.
Detail
|
|
HRUŠÁK, J., MAYER, D., PÁNEK, D. Dissipation normal form and its use for systematic analysis of non-linear phenomena. In AMTEE '05. Pilsen: University of West Bohemia, 2005. s. 17-24. ISBN: 80-7043-392-2
Detail
|
|
HRUŠÁK, J., ŠTORK, M., PÁNEK, D. On chaotic, pseudo-chaotic and hyper-chaotic behavior of strictly causal systems. In Applied electronics 2005. Pilsen: University of West Bohemia, 2005. s. 143-146. ISBN: 80-7043-369-8
Detail
|
2004
|
HRUŠÁK, J., ŠTORK, M., PÁNEK, D. Discrete-time Tellegen's principle and filter structures with reduced error sensitivity. In Applied electronics 2004. Pilsen: University of West Bohemia, 2004. s. 83-86. ISBN: 80-7043-274-8
Detail
|
|
KLUSAL, M., PÁNEK, D. Nové přístupy v analýze EEG. In Elektrotechnika a informatika 2004. Plzeň: Západočeská univerzita, 2004. s. 17-19. ISBN: 80-7043-299-3
Detail
|
2003
|
HRUŠÁK, J., PÁNEK, D. Signal energy conservation and lattice structure of asymptotic filters. In Applied Electronics 2003. Pilsen: University of West Bohemia, 2003. s. 96-99. ISBN: 80-7082-951-6
Detail
|
Courses
Winter semester
| null | KEP/ED |
| Matematické modely v elektromagnetismu | KEP/MMEM |
| Modelování ve vysokofrekvenční technice | KEP/MVFT |
| null | KEP/OPA |
| Počítačové modelování v materiál. inžen. | KEP/PM |
| null | KEV/PM |
| Semestrální projekt 4 | KEP/QSP4 |
| Teoretická elektrotechnika - AV | KEP/TEA |
| null | KEP/YTE2 |
| null | KEP/TEL3 |
| Teoretická elektrotechnika-vybrané statě | KEP/TEVS |
| Výpočetní metody a zpracování dat v el. | KEP/VMZ |
| Závěrečná zk. Modelování v elektronice | KEP/ZZMEL |
Summer semester
| null | KEP/ATE |
| Mikroelektromechanické systémy a senzory | KEP/MSS |
| null | KEP/YTE1 |
| null | KEP/TEL2 |
| null | KEP/TEMP |
| Výpočetní metody a zpracování dat v el. | KEP/VMZ |
| Závěrečná zk. Modelování v elektronice | KEP/ZZMEL |